德国Elektror,1923年成立的德国依莱克罗有限公司是世界范围内居领导地位的工业离心风机和侧隧道风机制造商。其离心风机风量可达8520立方米/小时。侧风道风机压力升达550毫巴,风量1140立方米/小时。

上海尚帛机电科技有限公司 是Elektror在中国的一级代理。尚帛与Elektror之间有着密切合作。

尚帛代理的Elektror产品如下：

ND系列 — 低压风机

工作范围：压力升为2000Pa  风量为95m3/min  

低压风机的扇叶由镀锌钢板制成  叶片顺风机旋转方向弯曲，从左或向右旋转

D 066以上的 型号，扇叶适用于50Hz 和60Hz，  但叶轮轴异于标准型

应用范围：中小系统阻力下输送大量气体  设备和机器部件的冷却 电动机械的外部通风

RD系列 — 中压风机

作用范围：压力值为 9.600 Pa 风量为125 m3/min

中压风机的扇叶是封闭式扇叶   风机顺时针或逆时针旋转，叶片弯曲向旋转相反方向

到 RD 84 型号的风机扇叶为铝板  从 RD 92至94以上型号，风机扇叶为钢板

扇叶有适合50Hz或 60Hz频率的相应设计 到 RD74 所有型号风机可带底座或无底座供货  RD 8 以上型号所有风机都带底盘

应用范围：大系统阻力下输送中量的气体  干燥设备的送风  气垫桌的送风 过滤除尘装置

HRD系列 — 高压风机

作用范围：压力升为16.400Pa   风量为96 m3/min

高压风机的扇叶是封闭式扇叶 风机顺时针或逆时针旋转，叶片弯曲向旋转相反方向

至HRD65 型号的风机扇叶为铝板  HRD7以上型号，风机扇叶为钢板

应用范围：极高系统压力下输送中量的空气   抽真空 气垫桌的送风   燃气,燃油和燃煤系统

附件：与RD系列相同

特殊变型：与RD系列相同   无双层温度隔离层

FD/RDF系列 — 物料输送风机

物料输送风机有两种： 

FD：坚固的沙铸外壳，有清洁开口，壳体位置只限Br

RDF：铝外壳同RD系列，特殊物料输送风机叶轮

物料输送风机的扇叶：开放式平直叶片

作用范围：压力升为 6.800 Pa    风量为 64 m3/min  扇叶材质:钢板

附件：进气端与排气端适用的各种直径的软管接头

     RDF系列与RD系列附件相同   无特殊变型

应用范围：可用来输送塑料颗粒，塑料废物及各种无毒无害的轻微物品

SVD系列 — 特种风机

作用范围：压力升为 2.600 Pa    风量为 71 m3/min

SVD系列风机的扇叶：开放式平直叶片   材制：钢或铝

应用范围：气体和蒸汽的排空 汽车尾/废气排放系统 焊接废气排放进气端和排气端

SD — 侧隧道风机

侧隧道风机是用来传送空气和其它气体的流体机械

风机叶轮与侧隧道相对，在进气和排气端间组成一个 环状作用空间

通过多种加速在风机内产生一螺旋状气流，从而产生更高的压力

作用范围：压力值为 550 毫巴 （mbar风量为 19 m3/min

SD系列风机的叶轮有开放式和封闭式两种

材质：铝

允许介质温度为40℃(更高温度需询问供货商)

应用范围：极大系统阻力下输送中小量气体   气体管线传输系统  真空/气动起重设备 水处理

特殊变型：不锈钢轴加特弗龙轴封  消音外罩，噪音减低可达8-10分贝

　　　　　已经UL注册的产品

ND series-low voltage fan scope of work :the greatest amount of wind pressure was upgraded to 95m3/min 2000Pa largest low-pressure fan blade made of galvanized steel sheet from the fanleaf wind direction rotating bending machine,Left or right over the rotating D 066 models, fanleaf apply to 50Hz and 60Hz.However, the shaft Unlike standard application :System resistance is supplying a large number of small and medium-sized gas cooling equipment, electrical machinery and machine parts external ventilation

RD Series-pressure fan scope :Pa maximum pressure value of 9.600 125 m 3 per minute for the greatest amount of wind pressure which is closed fanleaf Fan Fan fanleaf clockwise or counterclockwise rotation.RD curved blades rotating in opposite directions to the fanleaf fan of the 84 models generated from RD 92 to 94 more models,Fans fanleaf plate fanleaf suitable for the corresponding frequency of 50Hz or 60Hz RD74 all models designed to be fan base with the base or supply RD eight fans have brought all these models : application of chassisresistance system under which large volume of gas delivered to the Air drying equipment installed air-cushioned tables Air filter

HRD Series-high pressure air scope :16.400Pa maximum pressure was upgraded to 96 m 3 per minute for the greatest amount of wind pressure axial fan is the blower fan closed fanleaf clockwise or counterclockwise rotation.HRD65 curved blades rotating in opposite directions to the type of fan fanleaf Aluminum HRD7 above modelsFans fanleaf application for the plate under pressure conveying system : high volume air blast vacuum gas cushion table.oil and coal in the blast Annex : RD Series RD series with the same special variant : the same temperature without double-layer isolation

FD/RDF Series-material transport materials transportation Fan Fan : FD : two solid sand-cast frames,clean opening, the location of shell aluminum shell with only Br RDF : RD series.special material handling fan blower impeller material delivered straight to the fanleaf leaves open scope : :Pa maximum wind pressure was upgraded to the largest amount of 6.800 m 3 64 min fanleaf plate material : Annex :Intake and exhaust terminal end of the applicable series with a diameter of the hose joints RDF RD series of special annex without a change in the same application :can be used to transport plastic granules, plastic waste and various other minor items innocuoussolvent

SVD series-special fan scope :Pa maximum wind pressure was upgraded to the largest amount of 2.600 m 3 71 min SVD Fans fanleaf series :Open straight blade system : steel or aluminum materials application :automobile tail gas and steam 266071 / emission systems and welding exhaust emission gas terminal end of the annex

SD-side tunnel is used to carry air blower fan side of the tunnel and the other gas blower impeller and the side of the tunnel relative fluid machinery.between the inlet and exhaust terminal space through a variety of roles to speed up the formation of a ring generated in a spiral flow fan,thereby creating a higher pressure area :maximum value of 550 millibar pressure (19 mbar m 3 per minute for the greatest amount of wind SD series are open and closed impeller fan of the two materials :Media aluminum maximum allowable temperature of 40 ° C (higher temperatures required to ask vendors) applications :small amount of gas transmission system under tremendous resistance gas pipeline transmission system vacuum / pneumatic lifting equipment variant special treatment :Long stainless steel shaft seals Jiatefu Muffler jacket.8-10 dB noise reduction could have UL-registered products

IFM  上海尚帛机电科技有限公司 代理德国IFM爱福门 传感器